Analisis kinerja sistem produksi pada industri produsen tahu bandung dengan pendekatan simulasi event diskrit: Studi kasus pada Tahu Bandung ALN
DOI:
https://doi.org/10.61511/jipagi.v1i1.741Keywords:
industri manufaktur, industri produsen tahu bandung, simulasi kejadian diskrit, sistem produksiAbstract
Background: This study aims to analyze the performance of the production system currently implemented by Tahu Bandung ALN and propose alternative improvements that can make the performance of the production system more efficient. Methods: This study uses a discrete-event simulation approach, and the parameters of performance used are total production time and total production costs. Finding: The results of the base case scenario simulation found that there are several production processes that have waiting times which indicate the bottlenecks. Therefore, two alternative of improvements are proposed, namely the first scenario (adding more resources in the production processes that have waiting times) and the second scenario (combination of adding more resources in the production processes that have waiting times and implementing the inventory policy of certain raw material). Conclusion: The first alternative scenario is the better one as it can provide an improved performance, in which the total production time is reduced by 22,40% and the total production cost is reduced by 40,57%.
References
Altiok, T. & Melamed, B. (2007). Simulation Modeling and Analysis with Arena. Academic Press.
Badan Pusat Statistik. (2020). Indikator Industri Manufaktur 2018. Badan Pusat Statistik.
Banks, J., Carson II, J.S., Nelson, B.L., & Nicol, D.M. (2005). Discrete-Event System Simulation. Prentice Hall.
Bartezzaghi, E. & Turco, F. (1989). The Impact of Just-in-time on Production System Performance: An Analytical Framework. International Journal of Operations & Production Management, 9(8), 40–62. https://doi.org/10.1108/EUM0000000001257.
Benton, W.C. (2010). Push and Pull Production Systems. Wiley Encyclopedia of Operations Research and Management Science. https://doi.org/10.1287/opre.40.3.521.
Bozarth, C.C. & Handfield, R.B. (2019). Introduction to Operations and Supply Chain Management. Pearson Education, Inc.
Carata, E. (2020). Analysis of Shop Floor Machine Parts Manufacturing Through Discrete Event Simulation. Bulletin of the Polytechnic Institute of Jassy, 66(70), 35-42. https://www.cmmi.tuiasi.ro/wp-content/uploads/buletin/2020%20fasc%204/L4_CMMI%204_2020.pdf.
Choi, B. & Kang, D. (2013). Modeling and Simulation of Discrete-Event Systems. John Wiley & Sons.
Dilworth, J.B. (1993). Production and Operations Management: Management and Services. (5th ed.). McGraw-Hill Book Co.
Ghrayeb, O., Phojanamongkolkij, N., & Tan, B. A. (2009). A hybrid push/pull system in assemble-to-order manufacturing environment. Journal of Intelligent Manufacturing, 20(4), 379–387. https://doi.org/10.1007/s10845-008-0112-6.
Groover, M. P. (2020). Fundamentals of Modern Manufacturing: Materials, Processes, and Systems (7th ed.). John Wiley & Sons.
Harding, H. A. (1984). Production Management. M&E Limited.
Heizer, J., Render, B., & Munson, C. (2017). Operations management: sustainability and supply chain management (12th ed.). Pearson Education, Inc.
Hernandez-Matias, J.C., Vizan, A., Hidalgo, A., & Rios, J. (2006). Evaluation of techniques for manufacturing process analysis. Journal of Intelligent Manufacturing, 17(5), 571–583. https://doi.org/10.1007/s10845-006-0025-1.
Huang, S.H., Dismukes, J.P., Shi, J., Su, Q., Wang, G., Razzak, M.A., & Robinson, D.E. (2002). Manufacturing system modeling for productivity improvement. Journal of Manufacturing Systems, 21(4), 249–259. https://doi.org/10.1016/S0278-6125(02)80165-0.
Jahangirian, M., Eldabi, T., Naseer, A., Stergioulas, L.K., & Young, T. (2010). Simulation in manufacturing and business: A review. European Journal of Operational Research, 203(1), 1–13. https://doi.org/10.1016/j.ejor.2009.06.004.
Kementerian Perindustrian. (2020). Laporan Kinerja Pembangunan Industri Tahun 2020. Kementerian Perindustrian.
Law, A.M. (2015). Simulation Modeling and Analysis (5th ed.). McGraw-Hill Education.
Pedgen, C.D., Shannon, R.E., & Sadowski, R.P. (1995). Introduction to Simulation Using SIMAN. McGraw-Hill Inc.
Puchkova, A., Le Romancer, J., & McFarlane, D. (2016). Balancing Push and Pull Strategies within the Production System. IFAC-PapersOnLine, 49(2), 66–71. https://doi.org/10.1016/j.ifacol.2016.03.012.
Rasib, A.H.A., Abdullah, R., Bazilah, N.F., Rafaai, Z.F.M., & Noor, R.M. (2021). Production Smoothness Improvement through ARENA Application in the Food Manufacturing Industry. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12(3), 3516–3526. https://doi.org/10.17762/turcomat.v12i3.1627.
Russel, R.S. & Taylor, B.W. (2011). Operations Management: Creating Value Along The Supply Chain (7th ed.). John Wiley & Sons.
Sandhu, M. A., Helo, P., & Kristianto, Y. (2013). Steel supply chain management by simulation modelling. Benchmarking, 20(1), 45–61. https://doi.org/10.1108/14635771311299489.
Sharma, P. (2015). Discrete-Event Simulation. International Journal of Scientific & Technology Research, 4(04), 136–140. https://www.ijstr.org/final-print/apr2015/Discrete-event-Simulation.pdf.
Walley, B.H. (1980). Production Management Handbook. Gower.
Wang, B. (2018). The Future of Manufacturing: A New Perspective. Engineering, 4(5), 722–728. https://doi.org/10.1016/j.eng.2018.07.020.
Zheng, N. & Lu, X. (2009). Comparative study on push and pull production system based on anylogic. Proceedings - 2009 International Conference on Electronic Commerce and Business Intelligence, ECBI 2009, 455–458. https://doi.org/10.1109/ECBI.2009.26.
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
Copyright (c) 2024 Jurnal Inovasi Pangan dan Gizi
This work is licensed under a Creative Commons Attribution 4.0 International License.
